📢 eStore will be at Sensors Converge, June 24-26 in Santa Clara, CA - use discount code 10036. Register now

Active

EVALSTPM34

Dual-phase energy metering evaluation board with 2 current transformers based on the STPM34

Target ApplicationSmart Grid Distribution and Smart Meters
Core ProductSTPM34
ECCN USEAR99
ECCN EUNEC
Packing TypeNot Applicable
RoHs compliantEcopack1
GradeIndustrial
Package NameCARD

The EVALSTPM34 evaluation board is a class 0.2, dual-phase meter with 2 CTs for power line systems with Vnom = 140 to 300 V(RMS), Inom / Imax = 5/100 A(RMS), flin = 50/60 Hz ± 10% and Tamb = -40 to +85 °C.Measured active/reactive power can be output from two programmable LEDs on the board.The...
Read More

Key features
  • 0.2% accuracy dual or split-phase meter
  • Vnom(RMS) = 140 to 300 V, Inom/Imax(RMS) = 5/100 A, flin = 50/60 Hz ± 10%
  • Connector for USB isolated hardware programmer tool STEVAL-IPE023V1 and PC GUI
  • USB-to-UART isolated connector to PC GUI using virtual COM port
  • SPI/UART switch for device peripheral selection
  • 2 programmable LEDs on board
  • Digital expansion to external system-on-chip or MCU
  • 3.3 V power supply: external or through STEVAL-IPE023V1 isolated USB board
  • IEC61000 standard compliant
  • RoHS compliant
In stock
Quantity $ per unit Savings
1$73.360%
Contact sales
$73.36
$0.00
Target ApplicationSmart Grid Distribution and Smart Meters
Core ProductSTPM34
ECCN USEAR99
ECCN EUNEC
Packing TypeNot Applicable
RoHs compliantEcopack1
GradeIndustrial
Package NameCARD

The EVALSTPM34 evaluation board is a class 0.2, dual-phase meter with 2 CTs for power line systems with Vnom = 140 to 300 V(RMS), Inom / Imax = 5/100 A(RMS), flin = 50/60 Hz ± 10% and Tamb = -40 to +85 °C.Measured active/reactive power can be output from two programmable LEDs on the board.The...
Read More

Key features
  • 0.2% accuracy dual or split-phase meter
  • Vnom(RMS) = 140 to 300 V, Inom/Imax(RMS) = 5/100 A, flin = 50/60 Hz ± 10%
  • Connector for USB isolated hardware programmer tool STEVAL-IPE023V1 and PC GUI
  • USB-to-UART isolated connector to PC GUI using virtual COM port
  • SPI/UART switch for device peripheral selection
  • 2 programmable LEDs on board
  • Digital expansion to external system-on-chip or MCU
  • 3.3 V power supply: external or through STEVAL-IPE023V1 isolated USB board
  • IEC61000 standard compliant
  • RoHS compliant