IPS1025HTR

IPS1025HTR

IPS1025H

Active

High efficiency, high-side switch with extended diagnostic and smart driving for capacitive loads

Quantity $ per Unit Savings
1 - 9$6.500%
10 - 24$5.8710%
25 - 99$5.6014%
100 - 249$4.8625%
250 - 499$4.6429%
500$4.2335%
Contact Sales
Out of stock
$6.50
Parameter NameParameter Value
Operating Temp Min Celsius-40.0
Operating Temp Max Celsius125.0
ECCN USEAR99
ECCN EUNEC
Packing TypeTube
RoHs compliantEcopack2
GradeIndustrial
Package NamePowerSSO 24

The IPS1025H/HQ and IPS1025H-32/HQ-32 are single high-side switch ICs able to drive capacitive, resistive or inductive loads with one side connected to ground.


The very low RDS-ON (≤ 25 mΩ up to TJ = 125 °C) makes the IC suitable for the applications with up to 2.4 A (IPS1025H/HQ) or 5.6 A (IPS1025H-32/HQ-32) steady state operating current.


The output channel is protected against junction over-temperature events by a junction temperature sensor, and a further temperature sensor is included to monitor case temperature, so the overheated output channel can only be turned back ON when the case temperature returns below the reset temperature.


The embedded overload protection circuit monitors the output current and, on triggering of the activation threshold (IPK), starts modulating the impedance of the output switch to limit the output current to ILIM, for both IC and load protection.


The IC offers two different sets of activation threshold and limitation levels (IPKH, ILIMH and IPKL, ILIML) for smart driving of capacitive loads (such as bulb lamps) and loads with initial peak current requirements.


The IC diagnostics is based on FLT1 and FLT2 pins (both current source); activated by respective overload or overtemperature events on the output channel.

Key features
  • 8 V to 60 V operating supply voltage range
  • Operating output current: 2.4 A (IPS1025H/HQ) or 5.6 A (IPS1025H-32/HQ-32)
  • Smart driving of capacitive load
  • Fast demagnetization of inductive loads
  • Under-voltage lock-out
  • VCC
    over-voltage protection
  • Output overload and over-temperature protections
  • Case over-temperature protection
  • Ground disconnection protection
  • Overload event diagnostic pin
  • Over-temperature event diagnostic pin
  • Designed to meet IEC 61000-4-2, IEC 61000-4-4, IEC 61000-4-5
  • Packages: PowerSSO-24 and QFN48L 8x6x0.9 mm