📢 Special June promo: $5.99 worldwide delivery until June 30th! No code or minimum order required. Shop now! 🛒





Single channel high-side switches

Quantity $ per Unit Savings
1 - 9$4.370%
10 - 24$4.096%
25 - 99$3.9510%
100 - 249$3.6517%
250 - 499$3.5419%
Contact Sales
Out of stock
Parameter NameParameter Value
Operating Temp Min Celsius-40.0
Operating Temp Max Celsius150.0
Packing TypeTube
RoHs compliantEcopack1
Package NamePowerSSO 12

The IPS160HF (Iout < 2.5 A) and IPS161HF (Iout < 0.7 A) are monolithic devices which can drive capacitive, resistive or inductive loads with one side connected to ground.

The 60 V operating range and Ron = 60 mΩ, combined with the extended diagnostic (Open Load, Over Load, Overtemperature) and the < 60 us propagation delay time at startup (enabling Class 3 for interface types C and D), make the IC suitable for applications implementing the proper architectures to address higher SIL levels.

The built-in overload and thermal shutdown protections guarantee the ICs, the application and the load against electrical and thermal overstress. Furthermore, in order to minimize the power dissipation when the output is shorted, a low-dissipative short-circuit protection (cut-off) is implemented to limit the output average current value and consequent device overheating. Cut-off delay time can be set by soldering an external capacitor or disabled by a resistor on pin 4 (CoD).

The DIAG common diagnostic open drain pin reports the open load in off-state, cut-off (overload) and thermal shutdown.

Key features
  • 8 V to 60 V operating voltage range
  • Minimum output current limitation: 0.7 A (IPS161HF) or 2.5 A (IPS160HF)
  • Short propagation delay at start-up (≤ 60 μs)
  • Fast demagnetization of inductive load
  • Non-dissipative short-circuit protection (cut-off)
  • Programmable cut-off delay time using external capacitor
  • Ground disconnection protection
  • VCC disconnection protection
  • Thermal shutdown protection
  • Undervoltage lock-out
  • Diagnostic signalization for: open load in off-state, cut-off and junction thermal shutdown
  • Designed to meet IEC 61131-2
  • PowerSSO12 package