L9800-TR

8 channels low side driver

Parameters

Operating Range	Automotive
Operating Temp Min Celsius	-40.0
Operating Temp Max Celsius	150.0
ECCN US	EAR99
ECCN EU	NEC
Packing Type	Tape And Reel
RoHs compliant	Ecopack2
Grade	Automotive Safety
Package Name	TFQFN 4X4X0.9 24L WETT> FLANKS

Description

The L9800 is an 8-channel LS driver designed for automotive applications (LEDs and relays) and compatible with resistive, inductive and capacitive loads. The device offers advanced diagnostic and protection functionalities such as open load, overcurrent and overtemperature detections, short to GND....
Read More

Key features

Key features
AEC-Q100 qualified Full ISO26262 compliant, ASIL-B systems ready General Eight LS drivers 16-bit SPI interface for outputs control and for diagnosis data communication Daisy chain compatible and available even with 8-bit SPI 2 parallel input pins with input mapping functionality Cranking capability down to V_BATT = 3 V Digital supply voltage range compatible with 3.3 V and 5 V MCU Bulb inrush mode (BIM) to drive 2 W lamps and electronic loads Two independent internal PWM generators for MCU offloads and to drive LEDs Very low quiescent current (with usage of IDLE pin) Limp-home mode (with usage of IDLE and IN pins) Safety features Temperature sensor and monitoring Serial communications using address feedback, 1 parity bit, frame counter and short frame detection Fail-safe activation via input pins Safe operation at low battery voltage (cranking) Protective functions Overcurrent latch off Lower supply voltage range for extended operation Electrostatic discharge (ESD) protection Reverse battery protection on VBATT without external components Short circuit battery protection Thermal shutdown latch off Diagnostic features Latched diagnostic information via SPI register Overcurrent and overtemperature detection at on state Off state diagnosis, able to detect and distinguish open load and short to GND conditions

In stock

Quantity	$ per unit	Savings
1-9	$1.89	2%
10-24	$1.39	25%
25-99	$1.27	31%
100-249	$1.13	39%
250-499	$1.06	43%
500	$1.02	45%
500 +	Contact sales

$1.89

$1.85

Parameters

Operating Range	Automotive
Operating Temp Min Celsius	-40.0
Operating Temp Max Celsius	150.0
ECCN US	EAR99
ECCN EU	NEC
Packing Type	Tape And Reel
RoHs compliant	Ecopack2
Grade	Automotive Safety
Package Name	TFQFN 4X4X0.9 24L WETT> FLANKS

Description

Key features

Key features
AEC-Q100 qualified Full ISO26262 compliant, ASIL-B systems ready General Eight LS drivers 16-bit SPI interface for outputs control and for diagnosis data communication Daisy chain compatible and available even with 8-bit SPI 2 parallel input pins with input mapping functionality Cranking capability down to V_BATT = 3 V Digital supply voltage range compatible with 3.3 V and 5 V MCU Bulb inrush mode (BIM) to drive 2 W lamps and electronic loads Two independent internal PWM generators for MCU offloads and to drive LEDs Very low quiescent current (with usage of IDLE pin) Limp-home mode (with usage of IDLE and IN pins) Safety features Temperature sensor and monitoring Serial communications using address feedback, 1 parity bit, frame counter and short frame detection Fail-safe activation via input pins Safe operation at low battery voltage (cranking) Protective functions Overcurrent latch off Lower supply voltage range for extended operation Electrostatic discharge (ESD) protection Reverse battery protection on VBATT without external components Short circuit battery protection Thermal shutdown latch off Diagnostic features Latched diagnostic information via SPI register Overcurrent and overtemperature detection at on state Off state diagnosis, able to detect and distinguish open load and short to GND conditions