Toggle Nav
Search
Compare ()
Cart 0
Menu
Account
Settings
  • Language
    English
    • Currency
    USD
    L9963F

    L9963F

    main product photo

    Active

    New

    L9963F-TR

    Automotive chip for battery management applications with daisy chain up to 31 devices

    Parameters
    Operating Temp Min Celsius-40.0
    Operating Temp Max Celsius105.0
    ECCN USEAR99
    ECCN EUNEC
    Packing TypeTape And Reel
    RoHs compliantEcopack2
    GradeAutomotive Safety
    Package NameTQFP-EP 64 10x10x1.0 mm
    Description

    The L9963F is a Li-ion battery monitoring and protecting chip for high-reliability automotive applications and energy storage systems. Up to 14 stacked battery cells can be monitored to meet the requirements of 48 V and higher voltage systems.Each cell voltage is measured with high accuracy, as...
    Read More

    Key features
    Key features
    • AEC-Q100 qualified
    • Measures 4 to 14 cells in series, with 0 μs desynchronization delay between samples. Supports also busbar connection without altering cell results
    • Coulomb counter supporting pack overcurrent detection in both ignition on and off states. Fully synchronized current and voltage samples
    • 16-bit voltage ADC with maximum error of ±2 mV in the [0.5 – 4.3] V range, after soldering, in [-40; +105] °C Tj range
    • 2.66 Mbps isolated serial communication with regenerative buffer, supporting dual access ring. Less than 4 us latency between start of conversion of the 1st and the 31st device in a chain. Less than 4 ms to convert and read 96 cells in a system using 8 L9963F and L9963T transceiver. Less than 8 ms to convert and read 210 cells in a system using 15 L9963F and L9963T transceiver. Less than 16 ms to convert and read 434 cells in a system using 31 L9963F and L9963T transceiver. Supports both XFMR and CAP based isolation
    • 200 mA passive internal balancing current for each cell in both normal and silent-balancing mode. Possibility of executing cyclic wake up measurements. Manual/Timed balancing, on multiple channels simultaneously; Internal/External balancing
    • Fully redundant cell measurement path, with ADC Swap, for enhanced safety and limp home functionality
    • Intelligent diagnostic routine providing automatic failure validation. Redundant fault notification through both SPI Global Status Word (GSW) and dedicated FAULT line
    • Two 5 V regulators supporting external load connection with 25 mA (VCOM) and 50 mA (VTREF) current capability
    • 9 GPIOs, with up to 7 analog inputs for NTC sensing
    • Robust hot-plug performance. No Zeners needed in parallel to each cell
    • Full ISO26262 compliant, ASIL-D systems ready
    In stock
    Quantity $ per unit Savings
    1-9$11.452%
    10-24$8.9420%
    25-99$8.3126%
    100-249$7.6232%
    250-499$7.2435%
    500$7.0937%
    500 + Contact sales
    $11.45
    $11.22
    Parameters
    Operating Temp Min Celsius-40.0
    Operating Temp Max Celsius105.0
    ECCN USEAR99
    ECCN EUNEC
    Packing TypeTape And Reel
    RoHs compliantEcopack2
    GradeAutomotive Safety
    Package NameTQFP-EP 64 10x10x1.0 mm
    Description

    The L9963F is a Li-ion battery monitoring and protecting chip for high-reliability automotive applications and energy storage systems. Up to 14 stacked battery cells can be monitored to meet the requirements of 48 V and higher voltage systems.Each cell voltage is measured with high accuracy, as...
    Read More

    Key features
    Key features
    • AEC-Q100 qualified
    • Measures 4 to 14 cells in series, with 0 μs desynchronization delay between samples. Supports also busbar connection without altering cell results
    • Coulomb counter supporting pack overcurrent detection in both ignition on and off states. Fully synchronized current and voltage samples
    • 16-bit voltage ADC with maximum error of ±2 mV in the [0.5 – 4.3] V range, after soldering, in [-40; +105] °C Tj range
    • 2.66 Mbps isolated serial communication with regenerative buffer, supporting dual access ring. Less than 4 us latency between start of conversion of the 1st and the 31st device in a chain. Less than 4 ms to convert and read 96 cells in a system using 8 L9963F and L9963T transceiver. Less than 8 ms to convert and read 210 cells in a system using 15 L9963F and L9963T transceiver. Less than 16 ms to convert and read 434 cells in a system using 31 L9963F and L9963T transceiver. Supports both XFMR and CAP based isolation
    • 200 mA passive internal balancing current for each cell in both normal and silent-balancing mode. Possibility of executing cyclic wake up measurements. Manual/Timed balancing, on multiple channels simultaneously; Internal/External balancing
    • Fully redundant cell measurement path, with ADC Swap, for enhanced safety and limp home functionality
    • Intelligent diagnostic routine providing automatic failure validation. Redundant fault notification through both SPI Global Status Word (GSW) and dedicated FAULT line
    • Two 5 V regulators supporting external load connection with 25 mA (VCOM) and 50 mA (VTREF) current capability
    • 9 GPIOs, with up to 7 analog inputs for NTC sensing
    • Robust hot-plug performance. No Zeners needed in parallel to each cell
    • Full ISO26262 compliant, ASIL-D systems ready
    Associated products