Flat $5.99 shipping rate worldwide throughout May - no code needed! Start your design today. Flat $5.99 shipping rate worldwide throughout May - no code needed! Start your design today. Flat $5.99 shipping rate worldwide throughout May - no code needed! Start your design today. Flat $5.99 shipping rate worldwide throughout May - no code needed! Start your design today. Flat $5.99 shipping rate worldwide throughout May - no code needed! Start your design today.

ST1480ABDR

Active

3.3V powered, 15kV ESD protected, up to 12 Mbps true RS-485/RS-422 transceiver

Quantity $ per Unit Savings
1 - 9$1.920%
10 - 24$1.7410%
25 - 99$1.6415%
100 - 249$1.3928%
250 - 499$1.3132%
500$1.1540%
Contact Sales
Out of stock
$1.92
Parameter NameParameter Value
Operating RangeIndustrial
Supply Voltage Min Volt3.0
Supply Voltage Max Volt5.5
Operating Temp Min Celsius-40.0
Operating Temp Max Celsius85.0
ECCN USEAR99
ECCN EUNEC
Packing TypeTape And Reel
ROHS Compliance GradeEcopack3
GradeIndustrial
Package NameSO-8

The ST1480Ax is ±15 kV ESD protected, 3.3 V low power transceiver for RS-485 and RS-422 communications. The device contains one driver and one receiver in half duplex configuration.


The ST1480Ax transmits and receives at a guaranteed data rate of at least 12 Mbps.


All transmitter outputs and receiver inputs are protected to ±15 kV using Human Body Model.


Driver is short-circuit current limited and is protected against excessive power dissipation by


thermal shutdown circuitry that places the driver outputs into a high-impedance state.


The ST1480Ax input has a true fail-safe feature that guarantees a logic high output if both inputs are open circuit, shorted together or in the presence of a termination with no signal on the bus.

Key features
  • ESD protection
    • ±15 kV human body model
    • ±8 kV IEC 1000-4-2 contact discharge
  • Operates from a single 3.3 V supply - no charge pump required
  • Interoperable with 5 V logic
  • 1 μA low current shutdown mode max
  • Guaranteed 12 Mbps data rate
  • -7 to 12 common mode input voltage range
  • Half duplex versions available
  • Industry standard 75176 pinout
  • Current limiting and thermal shutdown for driver overload protection
  • Guaranteed high receiver output state for floating, shorted or terminated inputs with no signal present
  • Allows up to 64 transceivers on the bus