📢 Flat rate shipping below $10 in multiple countries! Limited offer ends May 31 🛒 Order now

Active

STEVAL-CCA044V1

160 W+160 W dual BTL class-D audio amplifier demonstration board based on the TDA7498E

Core ProductTDA7498E
ECCN USEAR99
ECCN EUNEC
Packing TypeNot Applicable
RoHs compliantEcopack2
GradeIndustrial
Package NameCARD

The STEVAL-CCA044V1 demonstration board is designed for the TDA7498E high power dual BTL class-D audio amplifier.Thanks to its high efficiency, the device assembled in the PSSO36 (slug-down) package is capable of dissipating heat without a heatsink.Jumpers on the board allow the configuration of...
Read More

Key features
  • High output-power capability:
    • 2 x 160 W / 4 Ω at 36 V, 1 KHz, THD = 10%
    • 1 x 220 W / 4 Ω at 36 V, 1 KHz, THD = 10%
  • Wide-range, single supply operation (14 V- 36 V)
  • High efficiency (η = 85%)
  • Four selectable, fixed gain settings(23.6 dB, 29.6 dB,33.1 dB and 35.6 dB)
  • Differential inputs to minimize common-mode noise
  • Standby and mute features
  • Short-circuit and thermal overload protection
  • Externally synchronizable
  • RoHS compliant
Out of Stock
Quantity $ per unit Savings
1$74.730%
Contact sales
$74.73
Core ProductTDA7498E
ECCN USEAR99
ECCN EUNEC
Packing TypeNot Applicable
RoHs compliantEcopack2
GradeIndustrial
Package NameCARD

The STEVAL-CCA044V1 demonstration board is designed for the TDA7498E high power dual BTL class-D audio amplifier.Thanks to its high efficiency, the device assembled in the PSSO36 (slug-down) package is capable of dissipating heat without a heatsink.Jumpers on the board allow the configuration of...
Read More

Key features
  • High output-power capability:
    • 2 x 160 W / 4 Ω at 36 V, 1 KHz, THD = 10%
    • 1 x 220 W / 4 Ω at 36 V, 1 KHz, THD = 10%
  • Wide-range, single supply operation (14 V- 36 V)
  • High efficiency (η = 85%)
  • Four selectable, fixed gain settings(23.6 dB, 29.6 dB,33.1 dB and 35.6 dB)
  • Differential inputs to minimize common-mode noise
  • Standby and mute features
  • Short-circuit and thermal overload protection
  • Externally synchronizable
  • RoHS compliant