📢 Flat rate shipping below $10 in multiple countries! Limited offer ends May 31 🛒 Order now

Active

STEVAL-IOM001V1

IO-Link master evaluation board based on L6360 equipped with ST morpho connectors for STM32 Nucleo

Target ApplicationIO-Link modules
Core ProductL6360
ECCN USEAR99
ECCN EUNEC
Packing TypeNot Applicable
RoHs compliantEcopack2
GradeIndustrial
Package NameCARD

The STEVAL-IOM001V1 evaluation board is based on the L6360 IO-Link master transceiver with physical layer compliant with IO-Link v1.1 specification.Together with the STSW-IOM001 example code, it provides an affordable and easy-to-use solution for the development of user applications, letting you...
Read More

Key features
  • IO-Link master PHY based on L6360
  • Interrupt diagnostics pin
  • I²C and UART interface
  • SPI (slave) interface
  • 65 mA selectable (3.3 or 5.0 V) linear regulator
  • CQ (push-pull) and L+ (high side) switches
  • IQ additional IEC61131-2 type 1 digital input
  • L+ and CQ overload and overheating protections with non-dissipative cut-off function
  • QFN-26L (3.5x5x1 mm) package
  • Operating voltage range from 18 to 32.5 V
  • Additional high side switch for L+ heavy loads (IPS161H)
  • LEDs for status and diagnostics
  • Ground and VCC wire break protections
  • EMC compliance with IEC61000-4-2, IEC61000-4-3, IEC61000-4-5
  • Equipped with ST morpho connectors
  • CE certified
  • RoHS and China RoHS compliant
In stock
Quantity $ per unit Savings
1$42.280%
Contact sales
$42.28
$42.28
Target ApplicationIO-Link modules
Core ProductL6360
ECCN USEAR99
ECCN EUNEC
Packing TypeNot Applicable
RoHs compliantEcopack2
GradeIndustrial
Package NameCARD

The STEVAL-IOM001V1 evaluation board is based on the L6360 IO-Link master transceiver with physical layer compliant with IO-Link v1.1 specification.Together with the STSW-IOM001 example code, it provides an affordable and easy-to-use solution for the development of user applications, letting you...
Read More

Key features
  • IO-Link master PHY based on L6360
  • Interrupt diagnostics pin
  • I²C and UART interface
  • SPI (slave) interface
  • 65 mA selectable (3.3 or 5.0 V) linear regulator
  • CQ (push-pull) and L+ (high side) switches
  • IQ additional IEC61131-2 type 1 digital input
  • L+ and CQ overload and overheating protections with non-dissipative cut-off function
  • QFN-26L (3.5x5x1 mm) package
  • Operating voltage range from 18 to 32.5 V
  • Additional high side switch for L+ heavy loads (IPS161H)
  • LEDs for status and diagnostics
  • Ground and VCC wire break protections
  • EMC compliance with IEC61000-4-2, IEC61000-4-3, IEC61000-4-5
  • Equipped with ST morpho connectors
  • CE certified
  • RoHS and China RoHS compliant