Active

STPMIC07M

Power Management IC: 4 Buck regulators, 3 LDO, I2C Interface

Input Voltage Min Volt2.6
Input Voltage Max Volt5.5
ECCN USEAR99
ECCN EUNEC
Packing TypeTape And Reel
RoHs compliantEcopack2
GradeIndustrial
Package NameUFQFPN-MR 3.2X4.2 48 (BUMPED)

STPMIC07M is a power management device designed for consumer applications. It features 4 Buck and 3 LDO regulators which output voltages are fully programmable. Buck regulators are able to maintain high efficiency at both normal and light load. The device communicates with the controller via I2C...
Read More

Key features
  • Supply input voltage range
    • VIN from 2.6 V to 5.5 V
  • Fully integrated power solution
    • One 4 A DC/DC buck converter
    • Three 2 A DC/DC buck converters
    • Three LDOs up to 600 mA
    • Integrated NMOS/PMOS power devices
    • Dynamically programmable output voltage (0.6 V - 3.75 V)
  • Device configurability
    • Programmable soft start slope with warm startup support
    • Programmable buck phase interleaving
    • Programmable nReset and Power Good pins
    • Programmable start up sequence
  • High efficiency
    • PFM mode with low quiescent current
    • Automatic PWM / PSK mode transition for efficiency optimization
  • High speed I2C serial interface (3.4 MHz)
  • Temperature monitor and shutdown
  • 4.2x3.2x0.6 mm, 48 balls, UFQFPN package
Out of Stock
Quantity $ per unit Savings
1-500$0.000%
Contact sales
$0.00
Input Voltage Min Volt2.6
Input Voltage Max Volt5.5
ECCN USEAR99
ECCN EUNEC
Packing TypeTape And Reel
RoHs compliantEcopack2
GradeIndustrial
Package NameUFQFPN-MR 3.2X4.2 48 (BUMPED)

STPMIC07M is a power management device designed for consumer applications. It features 4 Buck and 3 LDO regulators which output voltages are fully programmable. Buck regulators are able to maintain high efficiency at both normal and light load. The device communicates with the controller via I2C...
Read More

Key features
  • Supply input voltage range
    • VIN from 2.6 V to 5.5 V
  • Fully integrated power solution
    • One 4 A DC/DC buck converter
    • Three 2 A DC/DC buck converters
    • Three LDOs up to 600 mA
    • Integrated NMOS/PMOS power devices
    • Dynamically programmable output voltage (0.6 V - 3.75 V)
  • Device configurability
    • Programmable soft start slope with warm startup support
    • Programmable buck phase interleaving
    • Programmable nReset and Power Good pins
    • Programmable start up sequence
  • High efficiency
    • PFM mode with low quiescent current
    • Automatic PWM / PSK mode transition for efficiency optimization
  • High speed I2C serial interface (3.4 MHz)
  • Temperature monitor and shutdown
  • 4.2x3.2x0.6 mm, 48 balls, UFQFPN package