TDA7577BLV

2 x 75 W dual-bridge power amplifier with I2C complete diagnostics and "start-stop" profile (6 V operation)

Parameters

Supply Voltage Min Volt	6.0
Operating Temp Min Celsius	-40.0
Operating Temp Max Celsius	105.0
ECCN US	EAR99
ECCN EU	NEC
Packing Type	Tube
RoHs compliant	Ecopack2
Grade	Automotive
Package Name	FLEXIWATT FM2 27

Description

The TDA7577BLV is a new MOSFET dual bridge amplifier specially intended for car radio applications. Thanks to the DMOS output stage the TDA7577BLV has a very low distortion allowing a clear powerful sound, together with high output power capability.It is a very flexible device capable to support...
Read More

Key features

Key features
MOSFET (DMOS) output power stage High-efficiency (class SB) Single-channel 1 Ω driving capability 84 W undistorted power High output power capability 2 x 28 W / 4 Ω @ 14.4 V, 1 kHz, 10 % THD Max. output power 2 x 75 W / 2 Ω,1 x 150 W / 1 Ω Full I²C bus driving with 4 addresses Low voltage (6 V) operation (i.e. 'start-stop') Gain 16/26 dB Full digital diagnostic (AC and DC loads) Legacy mode (operation without I²C) Differential inputs Fault detection through integrated diagnostics DC offset detection Two independent short circuit protections Diagnostic on clipping detector with selectable threshold (2 % / 10 %) Clipping detector pin ST-BY and MUTE pins ESD protection Very robust against misconnections

Out of Stock

Quantity	$ per unit	Savings
1-356	$8.71	0%
357-500	$5.17	41%
500 +	Contact sales

$8.71

Parameters

Supply Voltage Min Volt	6.0
Operating Temp Min Celsius	-40.0
Operating Temp Max Celsius	105.0
ECCN US	EAR99
ECCN EU	NEC
Packing Type	Tube
RoHs compliant	Ecopack2
Grade	Automotive
Package Name	FLEXIWATT FM2 27

Description

Key features

Key features
MOSFET (DMOS) output power stage High-efficiency (class SB) Single-channel 1 Ω driving capability 84 W undistorted power High output power capability 2 x 28 W / 4 Ω @ 14.4 V, 1 kHz, 10 % THD Max. output power 2 x 75 W / 2 Ω,1 x 150 W / 1 Ω Full I²C bus driving with 4 addresses Low voltage (6 V) operation (i.e. 'start-stop') Gain 16/26 dB Full digital diagnostic (AC and DC loads) Legacy mode (operation without I²C) Differential inputs Fault detection through integrated diagnostics DC offset detection Two independent short circuit protections Diagnostic on clipping detector with selectable threshold (2 % / 10 %) Clipping detector pin ST-BY and MUTE pins ESD protection Very robust against misconnections