📢 eStore will be at Sensors Converge, June 24-26 in Santa Clara, CA - use discount code 10036. Register now

Active

EVAL-L9960

Evaluation board L9960 H-bridge

Core ProductL9960
ECCN USEAR99
ECCN EUNEC
Packing TypeNot Applicable
RoHs compliantNot compliant
GradeIndustrial
Package NameCARD

The EVAL-L9960 and EVAL-L9960T are the simplest solution to evaluate respectively the L9960 and L9960T functionalities providing all the inputs and outputs capabilities necessary to drive DC motors and monitor diagnostic functions.The driving strategy is enhanced by configurable PWM / DIR pins as...
Read More

Key features
  • Wide supply voltage range (VBatt): 4V÷28V
  • Current limitation threshold set by SPI:
  • 4 levels from 2.5A to 8.6A (Typ.)
  • Device controlled and programmed via SPI
  • Diagnostic functions accessible via SPI:
    • short circuit to battery,
    • short circuit to ground,
    • short circuit overload,
    • over temperature,
    • open load
  • On board 5V, 1.5A Voltage regulator
  • 2 LEDs for monitoring VBatt and EN signal.
  • Input signal connector compatible with the SPC5 Discovery+ boards.
  • Possibility to connect the board to microcontroller boards by a simple adaptor or by wires.
  • Test points to monitoring both input signals (SPI, PWM, EN) and outputs
  • Flexible driving strategy via configurable pins PWM/DIR (IN1/IN2):
    • No heat-sink is required
In stock
Quantity $ per unit Savings
1-2$104.130%
Contact sales
$104.13
$104.13
Core ProductL9960
ECCN USEAR99
ECCN EUNEC
Packing TypeNot Applicable
RoHs compliantNot compliant
GradeIndustrial
Package NameCARD

The EVAL-L9960 and EVAL-L9960T are the simplest solution to evaluate respectively the L9960 and L9960T functionalities providing all the inputs and outputs capabilities necessary to drive DC motors and monitor diagnostic functions.The driving strategy is enhanced by configurable PWM / DIR pins as...
Read More

Key features
  • Wide supply voltage range (VBatt): 4V÷28V
  • Current limitation threshold set by SPI:
  • 4 levels from 2.5A to 8.6A (Typ.)
  • Device controlled and programmed via SPI
  • Diagnostic functions accessible via SPI:
    • short circuit to battery,
    • short circuit to ground,
    • short circuit overload,
    • over temperature,
    • open load
  • On board 5V, 1.5A Voltage regulator
  • 2 LEDs for monitoring VBatt and EN signal.
  • Input signal connector compatible with the SPC5 Discovery+ boards.
  • Possibility to connect the board to microcontroller boards by a simple adaptor or by wires.
  • Test points to monitoring both input signals (SPI, PWM, EN) and outputs
  • Flexible driving strategy via configurable pins PWM/DIR (IN1/IN2):
    • No heat-sink is required