📢 Flat rate shipping below $10 in multiple countries! Limited offer ends May 31 🛒 Order now

Active

HDMI2C2-5F2

ESD protection and signal booster for HDMI sink control stage interface

Operating Temp Min Celsius-40.0
Operating Temp Max Celsius85.0
ECCN USEAR99
ECCN EUNEC
Packing TypeTape And Reel
RoHs compliantEcopack2
GradeIndustrial
Package NameCSP P 0.5 mm

The HDMI2C2-5F2 is an integrated ESD protection and signal conditioning device for control links of HDMI transmitters (sink).This device is a simple solution that provides HDMI designers with an easy and fast way to reach full compliance with the stringent HDMI CTS on a wide temperature...
Read More

Key features
  • For HDMI 1.4, 2.0 & 2.1 application, operating temperature from -40 to 85 °C
  • 8 kV contact ESD protection on connector side (IEC 61000-4-2 level 4)
  • Supports direct connection to low-voltage HDMI ASIC (down to 1.8 V)
  • High integration level in 1 package
  • DDC capacitive decoupling between ASIC and HDMI connector and dynamic pull-up for long cable driving
  • Enable function to sense 5V power supply presence from HDMI connector and to switch off for power consumption optimization
  • Backdrive protection on DDC bus
  • Proposed in 500 µm pitch WLCSP package 10 bumps for easy PCB layout
In stock
Quantity $ per unit Savings
1-9$0.810%
10-99$0.6915%
100-249$0.4940%
250-400$0.4940%
Contact sales
$0.81
$0.81
Operating Temp Min Celsius-40.0
Operating Temp Max Celsius85.0
ECCN USEAR99
ECCN EUNEC
Packing TypeTape And Reel
RoHs compliantEcopack2
GradeIndustrial
Package NameCSP P 0.5 mm

The HDMI2C2-5F2 is an integrated ESD protection and signal conditioning device for control links of HDMI transmitters (sink).This device is a simple solution that provides HDMI designers with an easy and fast way to reach full compliance with the stringent HDMI CTS on a wide temperature...
Read More

Key features
  • For HDMI 1.4, 2.0 & 2.1 application, operating temperature from -40 to 85 °C
  • 8 kV contact ESD protection on connector side (IEC 61000-4-2 level 4)
  • Supports direct connection to low-voltage HDMI ASIC (down to 1.8 V)
  • High integration level in 1 package
  • DDC capacitive decoupling between ASIC and HDMI connector and dynamic pull-up for long cable driving
  • Enable function to sense 5V power supply presence from HDMI connector and to switch off for power consumption optimization
  • Backdrive protection on DDC bus
  • Proposed in 500 µm pitch WLCSP package 10 bumps for easy PCB layout