📢 eStore will be at Sensors Converge, June 24-26 in Santa Clara, CA - use discount code 10036. Register now

Active

STM32G474E-EVAL1

Evaluation board with STM32G474QE MCU

Core ProductSTM32G474QE
ECCN US3A991.a.2
ECCN EUNEC
Packing TypeNot Applicable
RoHs compliantEcopack1
GradeIndustrial
Package NameCARD

The STM32G474E-EVAL board is a complete demonstration and development platform for the STMicroelectronics Arm® Cortex®‑M4 core-based STM32G474QET6 microcontroller, designed to make user application development easier.STM32G474E-EVAL1 features a motor-control configuration...
Read More

Key features
  • STM32G474QET6 (STM32G474E-EVAL and STM32G474E-EVAL1) or STM32G484QET6 (STM32G484E-EVAL) Arm® Cortex®‑M4 core‑based microcontroller with 512 Kbytes of flash memory and 96 Kbytes of RAM in an LQFP128 package
  • 240x320 TFT color LCD module with SPI interface
  • 16-Gbyte microSD™ card bundled
  • On-board current measurement
  • SAI audio codec
  • Temperature sensor
  • 8-Mbit (512 K x 16-bit) SRAM
  • Two 512-Mbit Quad-SPI NOR Flash memories
  • Four color user LEDs
  • One high‑brightness LED
  • Reset and wake-up/tamper buttons
  • 4-direction joystick with selection button
  • Light-dependent resistor (LDR)
  • Potentiometer
  • Access to a comparator and operational amplifier
  • Board connectors:
    • Analog line input jack
    • Stereo headset jack
    • Two connectors for external speakers
    • microSD™ card
    • EXT_I2C connector supporting I²C bus
    • RS-232 port configurable for communication or MCU flashing
    • RS-485 port
    • USB Type-C® port supporting USB FS Device
    • Two CAN 2.0A/B-compliant ports
    • Connector for DAC output
    • JTAG/SWD connector
    • ETM trace debug connector
    • User interface through USB virtual COM port
    • Embedded STLINK-V3E debug and flashing facility
    • TAG connector 10-pin footprint
    • Arm® Cortex® 10-pin 1.27 mm-pitch debug connector over STDC14 footprint
    • Coin cell battery holder
    • Two sets of motor control expansion connectors
    • Board expansion extension connectors
  • Flexible power-supply options: ST-LINK USB VBUS, USB connector, or external sources
  • Microcontroller supply voltage: fixed 3.3 V or adjustable range from 1.62 to 3.60 V
  • On-board STLINK-V3E debugger/programmer with USB re-enumeration capability: mass storage, Virtual COM port, and debug port
  • Comprehensive free software libraries and examples available with the STM32CubeG4 MCU Package
  • Support of a wide choice of Integrated Development Environments (IDEs) including IAR Embedded Workbench®, MDK-ARM, and STM32CubeIDE
In stock
Quantity $ per unit Savings
1$335.910%
Contact sales
$335.91
$335.90
Core ProductSTM32G474QE
ECCN US3A991.a.2
ECCN EUNEC
Packing TypeNot Applicable
RoHs compliantEcopack1
GradeIndustrial
Package NameCARD

The STM32G474E-EVAL board is a complete demonstration and development platform for the STMicroelectronics Arm® Cortex®‑M4 core-based STM32G474QET6 microcontroller, designed to make user application development easier.STM32G474E-EVAL1 features a motor-control configuration...
Read More

Key features
  • STM32G474QET6 (STM32G474E-EVAL and STM32G474E-EVAL1) or STM32G484QET6 (STM32G484E-EVAL) Arm® Cortex®‑M4 core‑based microcontroller with 512 Kbytes of flash memory and 96 Kbytes of RAM in an LQFP128 package
  • 240x320 TFT color LCD module with SPI interface
  • 16-Gbyte microSD™ card bundled
  • On-board current measurement
  • SAI audio codec
  • Temperature sensor
  • 8-Mbit (512 K x 16-bit) SRAM
  • Two 512-Mbit Quad-SPI NOR Flash memories
  • Four color user LEDs
  • One high‑brightness LED
  • Reset and wake-up/tamper buttons
  • 4-direction joystick with selection button
  • Light-dependent resistor (LDR)
  • Potentiometer
  • Access to a comparator and operational amplifier
  • Board connectors:
    • Analog line input jack
    • Stereo headset jack
    • Two connectors for external speakers
    • microSD™ card
    • EXT_I2C connector supporting I²C bus
    • RS-232 port configurable for communication or MCU flashing
    • RS-485 port
    • USB Type-C® port supporting USB FS Device
    • Two CAN 2.0A/B-compliant ports
    • Connector for DAC output
    • JTAG/SWD connector
    • ETM trace debug connector
    • User interface through USB virtual COM port
    • Embedded STLINK-V3E debug and flashing facility
    • TAG connector 10-pin footprint
    • Arm® Cortex® 10-pin 1.27 mm-pitch debug connector over STDC14 footprint
    • Coin cell battery holder
    • Two sets of motor control expansion connectors
    • Board expansion extension connectors
  • Flexible power-supply options: ST-LINK USB VBUS, USB connector, or external sources
  • Microcontroller supply voltage: fixed 3.3 V or adjustable range from 1.62 to 3.60 V
  • On-board STLINK-V3E debugger/programmer with USB re-enumeration capability: mass storage, Virtual COM port, and debug port
  • Comprehensive free software libraries and examples available with the STM32CubeG4 MCU Package
  • Support of a wide choice of Integrated Development Environments (IDEs) including IAR Embedded Workbench®, MDK-ARM, and STM32CubeIDE