STM32H503RBT6

High-performance, Arm Cortex-M33, MCU with 128-Kbyte Flash, 32-Kbyte RAM, 250 MHz CPU

Parameters

Supply Voltage Min Volt	1.62
Supply Voltage Max Volt	3.6
Operating Temp Min Celsius	-40.0
Operating Temp Max Celsius	85.0
Core	Arm Cortex-M33
ECCN US	3A991.a.2
ECCN EU	NEC
Packing Type	Tray
RoHs compliant	Ecopack2
Grade	Industrial
Package Name	LQFP 64 10x10x1.4 mm

Description

The STM32H503xx devices are a high-performance microcontrollers family (STM32H5 series) based on the high-performance Arm® Cortex®-M33 32-bit RISC core. They operate at a frequency of up to 250 MHz.The Cortex®-M33 core features a single-precision floating-point unit (FPU) that supports all the...
Read More

The STM32H503xx devices are a high-performance microcontrollers family (STM32H5 series) based on the high-performance Arm^® Cortex^®-M33 32-bit RISC core. They operate at a frequency of up to 250 MHz.

The Cortex^®-M33 core features a single-precision floating-point unit (FPU) that supports all the Arm^® single-precision data-processing instructions and all the data types.

The Cortex^®-M33 core also implements a full set of DSP (digital signal processing) instructions and a memory protection unit (MPU) that enhances the application security.

The devices embed high-speed memories (128 Kbytes of dual bank flash memory and 32 Kbytes of SRAM), and an extensive range of enhanced I/Os and peripherals connected to three APB buses, three AHB buses, and a 32-bit multi-AHB bus matrix.

The devices feature several protection mechanisms for embedded flash memory and SRAM: secure life cycle management, write protection and hide protection areas.

The devices embed several peripherals reinforcing security: a HASH hardware accelerator and a true random number generator.

The devices offer active tamper detection and protection against transient and environmental perturbation attacks. It is done thanks to several internal monitoring that generate a secret data erase in case of an attack.

The devices offer a fast 12-bit ADC, two DAC channels, an OPAMP, a comparator, a low-power RTC, one 32-bit general-purpose timer, one 16-bit PWM timer dedicated to motor control, one 16-bit general-purpose timer, two 16-bit basic timers and two 16-bit low-power timers.

The devices also feature standard and advanced communication interfaces such as: two I²Cs, two I3Cs shared with I²C, three SPIs with muxed full-duplex I2S, three USARTs and one low-power UART, one FDCAN, and one USB full-speed.

The devices operate in the - 40 to + 85 °C/105 °C, and up to 125 °C at low dissipation (+130 °C junction) temperature ranges from a 1.71 to 3.6 V power supply.

A comprehensive set of power-saving modes allows the design of low-power applications.

Some independent power supplies are supported like an analog independent supply input for ADC, DACs, COMP and OPAMP, and a dedicated supply input for some GPIOs. A VBAT input is available for connecting a backup battery. This battery preserves the RTC functionality and backup 32x 32-bit registers and 2-Kbyte SRAM.

The devices offer five packages from 25-pin to 64-pin.

Key features

Key features
Core Arm^® Cortex^®-M33 CPU with FPU, frequency up to 250 MHz, MPU, 375 DMIPS (Dhrystone 2.1), and DSP instructions ART Accelerator 8-Kbyte instruction cache allowing 0-wait-state execution from flash memory (frequency up to 250 MHz) Benchmarks 1.5 DMIPS/MHz (Drystone 2.1) 1023 CoreMark^® (4.092 CoreMark^®/MHz) Memories 128 Kbytes of embedded flash memory with ECC, two banks of read-while-write 2-Kbyte OTP (one-time programmable) 32-Kbyte SRAM with ECC 2 Kbytes of backup SRAM (available in the lowest power modes) Clock, reset, and supply management 1.71 V to 3.6 V application supply and I/O POR, PDR, PVD, and BOR Embedded regulator (LDO) Internal oscillators: 64 MHz HSI, 48 MHz HSI48, 4 MHz CSI, 32 kHz LSI Two PLLs for system clock, USB, audio, and ADC External oscillators: 4 to 50 MHz HSE, 32.768 kHz LSE Low-power modes Sleep, Stop and Standby modes V_BAT supply for RTC, 32 backup registers (32 bits) General-purpose inputs/outputs Up to 49 fast I/Os with interrupt capability (most 5 V tolerant) Up to 9 I/Os with independent supply down to 1.08 V Analog One 12-bit ADC, up to 2.5 MSPS One 12-bit dual-channel DAC One ultra-low-power comparator One operational amplifier (7 MHz bandwidth) One digital temperature sensor Up to 11 timers Six 16-bit (including two low-power 16-bit timer available in Stop mode) and one 32-bit timer Two watchdogs One SysTick timer RTC with hardware calendar, alarms, and calibration Communication interfaces Up to two I2Cs FM + interfaces (SMBus/PMBus^®) Up to two I3Cs shared with I2C Up to three USARTs (ISO7816 interface, LIN, IrDA, modem control) and one LPUART Up to three SPIs including three muxed with full-duplex I2S for audio class accuracy via internal audio PLL or external clock and up to three additional SPI from three USART when configured in synchronous mode One FDCAN One USB 2.0 full-speed host and device Two DMA controllers to offload the CPU Security HASH (SHA-1, SHA-2), HMAC True random generator 96-bit unique ID Active tamper Debug Authenticated debug Serial wire-debug (SWD) and JTAG interfaces ECOPACK2 compliant packages

In stock

Quantity	$ per unit	Savings
1-9	$3.90	0%
10-25	$3.50	10%
25 +	Contact sales

$3.90