Active

X-NUCLEO-NFC08A1

NFC card reader expansion board based on ST25R3916B for STM32 and STM8 Nucleos

Core ProductST25R3916B-AQWT
ECCN USEAR99
ECCN EUNEC
Packing TypeNot Applicable
RoHs compliantEcopack2
GradeIndustrial
Package NameCARD

The X-NUCLEO-NFC08A1 NFC card reader expansion board is based on the ST25R3916B device.The expansion board is configured to support ISO14443A/B, ISO15693, FeliCa™, and AP2P communication.The ST25R3916B manages frame coding and decoding in reader mode for standard applications, such as NFC,...
Read More

Key features
  • On-board NFC card reader IC: ST25R3916B
  • 47 mm x 34 mm, four turns, 13.56 MHz inductive antenna etched on PCB and associated tuning circuit
  • Six general-purpose LEDs
  • ISO 18092 passive and active initiator, ISO 18092 passive, and active target
  • NFC-A and NFC-F card emulation
  • ISO 14443A and ISO14443B
  • ISO 15693
  • FeliCa™
  • Up to 1.7 W output power with differential antenna
  • Possibility of driving two antennas in single-ended configuration
  • Inductive wake-up
  • Automatic antenna-tuning system
  • Transparent and stream modes to implement MIFARE™ classic compliant or other custom protocols
  • Equipped with Arduino UNO R3 connector
  • Free comprehensive development firmware library compatible with STM32Cube and samples for ST25R3916B
  • Scalable solution for multiple board cascade
  • FCC certified
  • RoHS and WEEE compliant
Out of Stock
Quantity $ per unit Savings
1$36.600%
Contact sales
$36.60
Core ProductST25R3916B-AQWT
ECCN USEAR99
ECCN EUNEC
Packing TypeNot Applicable
RoHs compliantEcopack2
GradeIndustrial
Package NameCARD

The X-NUCLEO-NFC08A1 NFC card reader expansion board is based on the ST25R3916B device.The expansion board is configured to support ISO14443A/B, ISO15693, FeliCa™, and AP2P communication.The ST25R3916B manages frame coding and decoding in reader mode for standard applications, such as NFC,...
Read More

Key features
  • On-board NFC card reader IC: ST25R3916B
  • 47 mm x 34 mm, four turns, 13.56 MHz inductive antenna etched on PCB and associated tuning circuit
  • Six general-purpose LEDs
  • ISO 18092 passive and active initiator, ISO 18092 passive, and active target
  • NFC-A and NFC-F card emulation
  • ISO 14443A and ISO14443B
  • ISO 15693
  • FeliCa™
  • Up to 1.7 W output power with differential antenna
  • Possibility of driving two antennas in single-ended configuration
  • Inductive wake-up
  • Automatic antenna-tuning system
  • Transparent and stream modes to implement MIFARE™ classic compliant or other custom protocols
  • Equipped with Arduino UNO R3 connector
  • Free comprehensive development firmware library compatible with STM32Cube and samples for ST25R3916B
  • Scalable solution for multiple board cascade
  • FCC certified
  • RoHS and WEEE compliant