📢Shop now for EEPROM products with FREE SHIPPING code EEPROM-M95-FREESHIP. Check out our M95P32-IXCST/EF and M95P16-IXMNT/E today! 





Wide range air fuel sensor control interface

Quantity $ per Unit Savings
1 - 9$9.170%
10 - 24$8.2910%
25 - 99$7.8015%
100 - 130$6.7826%
Contact Sales
Out of stock
Parameter NameParameter Value
Operating RangeAutomotive
Supply Voltage Min Volt4.9
Supply Voltage Max Volt5.1
Operating Temp Min Celsius-40.0
Operating Temp Max Celsius125.0
Operating Voltage Min Volt4.9
Operating Voltage Max Volt5.1
Packing TypeTray
RoHs compliantEcopack2
Package NameLQFP 48 7x7x1.4 mm

L9780 is an IC designed to interface a variety of wide range air fuel sensors.

The device manages the oxygen pump of the wide range air fuel sensor by means of a voltage controlled current source (VCCS). The reference for the VCCS is generated by a PI controller with external compensation network in order to adapt the device to different sensors. The user can choose between two different networks using the SPI interface. L9780 is fully compatible with most sensors on the market.

The internal timing state machine automatically manages all the operations needed for a right sequencing of the measurement process. All the main time values can be configured by SPI.

L9780 drives also an external FET used to control the sensor heater. The device protects the sensor and all the I/O against shorts and provides the diagnosis by SPI.

Key features
  • Voltage controlled current source (VCCS) pump cell driver with selectable voltage clamp, offset compensation, diagnostic (short to battery) and 2 output channels
  • Impedance measurement of reference cell
  • 10-bit multiplexed A/D converter
  • Scaling amplifier with sample & hold and offset compensation
  • Control voltage amplifier with sample & hold and offset compensation
  • Synchronous or asynchronous functionality selectable via SPI
  • Heater FET driver with diagnostic (short to battery, short to ground, open circuit)
  • 4 possible levels for clean current
  • SPI with fault detection
  • Digital input and outputs compatible with 5 V or 3.3 V voltage supply
  • 2 channels available to connect compensation networks
  • Short to battery diagnostic on functional ground (pin SR)
  • Short to battery/ground diagnostic on voltage from reference cell (pin INRC)
  • -5 V internal supply
  • 4 MHz internal oscillator
  • Package: 48 pin LQFP
  • Technology: BCD5s_70 V