L99UDL01TR

L99UDL01TR

Active

L99UDL01

Universal door lock IC

Operating RangeAutomotive
Supply Voltage Min Volt-0.3
Supply Voltage Max Volt28.0
Operating Temp Min Celsius-40.0
Operating Temp Max Celsius175.0
ECCN USEAR99
ECCN EUNEC
Packing TypeTray
RoHs compliantEcopack2
GradeAutomotive
Package NameTQFP 64 10x10x1.0

The L99UDL01 is a multiple half-bridge IC with 6 integrated outputs that are PWM configurable and current regulated and up to two externally configured half bridges for higher current nodes. The level of diagnostics includes open load, short to battery, short to ground, and load integrity via 10...
Read More

Key features
  • AEC-Q100 qualified
  • Six integrated fully protected 0.09 W half bridges
  • Integrated half bridges can be fully independent or paralleled up to three in parallel
  • Two levels of standby
    • Standby (SPI initiated)
    • Sleep (VDD=0 V)
  • Very low current consumption in standby
    • Only wake-up circuit active
  • High level of programmability
    • On-time duration
    • Direction
    • Current level
    • Off-state fault detection
  • 2 external half bridge controllers (using external N-channel MOSFETs or Smart Power devices)
  • External half bridges protected by drain source monitoring and off-state fault detection
  • 2 stage charge pump for low voltage operation
  • PWM current regulation up to 25 kHz
  • 4 MHz 24 bit SPI interface for control and diagnostics
  • Output enable for high security
  • High level diagnostics
  • 10 bit digital current feedback (via SPI) for load integrity check
  • Thermal warning and shutdown protection
  • Reverse battery protection using an external N-Ch MOSFET.
  • TQFP64L exposed pad package
Out of Stock
Quantity $ per unit Savings
1-4$8.070%
Contact sales
$8.07
Operating RangeAutomotive
Supply Voltage Min Volt-0.3
Supply Voltage Max Volt28.0
Operating Temp Min Celsius-40.0
Operating Temp Max Celsius175.0
ECCN USEAR99
ECCN EUNEC
Packing TypeTray
RoHs compliantEcopack2
GradeAutomotive
Package NameTQFP 64 10x10x1.0

The L99UDL01 is a multiple half-bridge IC with 6 integrated outputs that are PWM configurable and current regulated and up to two externally configured half bridges for higher current nodes. The level of diagnostics includes open load, short to battery, short to ground, and load integrity via 10...
Read More

Key features
  • AEC-Q100 qualified
  • Six integrated fully protected 0.09 W half bridges
  • Integrated half bridges can be fully independent or paralleled up to three in parallel
  • Two levels of standby
    • Standby (SPI initiated)
    • Sleep (VDD=0 V)
  • Very low current consumption in standby
    • Only wake-up circuit active
  • High level of programmability
    • On-time duration
    • Direction
    • Current level
    • Off-state fault detection
  • 2 external half bridge controllers (using external N-channel MOSFETs or Smart Power devices)
  • External half bridges protected by drain source monitoring and off-state fault detection
  • 2 stage charge pump for low voltage operation
  • PWM current regulation up to 25 kHz
  • 4 MHz 24 bit SPI interface for control and diagnostics
  • Output enable for high security
  • High level diagnostics
  • 10 bit digital current feedback (via SPI) for load integrity check
  • Thermal warning and shutdown protection
  • Reverse battery protection using an external N-Ch MOSFET.
  • TQFP64L exposed pad package