Act fast! Use SEP22BOARDS at checkout to get free shipping on  USB Type-C applications .



Industrial digital output expansion board based on IPS161HF for STM32 Nucleo

Quantity $ per Unit Savings
Contact Sales
In stock
Parameter NameParameter Value
Target ApplicationFactory Automation
Core ProductIPS161HF
Packing TypeNot Applicable
RoHs compliantEcopack2
Package NameCARD

The X-NUCLEO-OUT10A1 industrial digital output expansion board for STM32 Nucleo provides an affordable and easy-to-use solution for the development of 0.5 A (typ.) digital output modules, letting you easily evaluate the IPS161HF driving and diagnostic capabilities with industrial loads.

The X-NUCLEO-OUT10A1 interfaces with the microcontroller on the STM32 Nucleo via 3 kV optocouplers driven by GPIO pins and Arduino™ UNO R3 (default configuration) and ST morpho (optional, not mounted) connectors.

The expansion board should be connected to either a NUCLEO-F401RE or NUCLEO-G431RB development board, and can be stacked with another X-NUCLEO-OUT10A1 or an X-NUCLEO-OUT08A1 .

Two X-NUCLEO-OUT10A1 expansion boards allows you to evaluate a dual channel digital output module with 0.5 A (typ.) capability each, or a 0.5 A (typ.) single channel safety digital output module. In the second scenario, the first shield output is connected to the supply of the second one. Dedicated on-board hardware can be enabled or disabled to activate fast discharge of high capacitive loads, output voltage sensing and additional surge pulse output line protection.

Key features
  • Based on IPS161HF single high-side switch with the following main features:
    • Operating range up to 60 V/0.7 A
    • Low power dissipation (RON(MAX) = 120 mΩ)
    • Fast decay for inductive loads
    • Open load detection and diagnostics
    • Overload and overheating protections with thermal shut-down and cut-off
    • PowerSSO-12L package
  • Application board operating range: 12 - 33 V, 0 to 0.7 A
  • Extended voltage operating range (J1 open) up to 60 V
  • Green LED for output ON/OFF status
  • Red LED for diagnostics (open load, cut-off and overheating)
  • 3 kV galvanic isolation
  • Supply rail reverse polarity protection
  • Ready for Safety Digital Output Architecture
  • EMC compliance according to IEC61000-4-2, IEC61000-4-3, IEC61000-4-5
  • Wide application development potential in STM32 Nucleo development environment
  • Equipped with Arduino™ UNO R3 connectors
  • CE certified
  • RoHS and China RoHS compliant