X-NUCLEO-S2915A1

Sub-1 GHz 915 MHz RF expansion board based on S2-LP radio for STM32 Nucleo

Parameters

Core Product	S2-LP
ECCN US	EAR99
ECCN EU	NEC
Packing Type	Not Applicable
RoHs compliant	Ecopack2
Grade	Industrial
Package Name	CARD

Description

The X-NUCLEO-S2915A1 expansion board is based on the S2-LP radio and operates in the 915 MHz ISM frequency band.The expansion board is compatible with ST morpho and Arduino UNO R3 connectors.The X-NUCLEO-S2915A1 interfaces with the STM32 Nucleo microcontroller via SPI connections and GPIO pins. You...
Read More

Key features

Key features
Based on S2-LP radio S2-LP narrow band ultra-low power sub-1 GHz transceiver tuned for 860-940 MHz frequency band Programmable RF output power up to +27 dBm Modulation schemes: 2-FSK, 2-GFSK, 4-FSK, 4-GFSK, OOK and ASK Air data rate from 0.1 to 500 kbps Ultra-low power consumption: 7 mA RX and 10 mA TX at +10 dBm IEEE 802.15.4g hardware packet support with whitening, FEC, CRC and dual SYNC word detection RX and TX 128 byte FIFO buffers Support to wireless M-Bus Excellent performance of receiver sensitivity (up to -130 dBm) Automatic acknowledgement, retransmission and timeout protocol engine Compatible with STM32 Nucleo boards Compatible with Arduino UNO R3 connectors Sigfox compatible Sample firmware for P2P communication 6LoWPAN compatible thanks to STM32Cube FCC ID: S9NS2915A IC ID: 8976C-S2915A1 RoHS and WEEE compliant

In stock

Quantity	$ per unit	Savings
1	$42.88	0%
1 +	Contact sales

$42.88

Parameters

Core Product	S2-LP
ECCN US	EAR99
ECCN EU	NEC
Packing Type	Not Applicable
RoHs compliant	Ecopack2
Grade	Industrial
Package Name	CARD

Description

Key features

Key features
Based on S2-LP radio S2-LP narrow band ultra-low power sub-1 GHz transceiver tuned for 860-940 MHz frequency band Programmable RF output power up to +27 dBm Modulation schemes: 2-FSK, 2-GFSK, 4-FSK, 4-GFSK, OOK and ASK Air data rate from 0.1 to 500 kbps Ultra-low power consumption: 7 mA RX and 10 mA TX at +10 dBm IEEE 802.15.4g hardware packet support with whitening, FEC, CRC and dual SYNC word detection RX and TX 128 byte FIFO buffers Support to wireless M-Bus Excellent performance of receiver sensitivity (up to -130 dBm) Automatic acknowledgement, retransmission and timeout protocol engine Compatible with STM32 Nucleo boards Compatible with Arduino UNO R3 connectors Sigfox compatible Sample firmware for P2P communication 6LoWPAN compatible thanks to STM32Cube FCC ID: S9NS2915A IC ID: 8976C-S2915A1 RoHS and WEEE compliant